| DELRIN® (Click for Properties & Specs) Back to the Materials Group main page. Delrin® combines the toughness, dimensional stability and abrasion resistance of acetal with the tremendous self-lubricity of Teflon fibers. Oriented Teflon fibers are uniformly dispersed in the acetal resin to produce this high performance material. It is ideally suited for moving parts where lubrication is impractical or Pressure Velocity ( PV ) is a factor. Uses: bushings bearings valve seats
sliding applications wire guides
anti-friction parts and many more.
Properties: low coefficient of friction
high resistance to abrasion and wear excellent dimensional stability
Tolerances: 1/4" to 1" diameter +.002 - .000
1-1/8" to 1-3/4" diameter +.005 - .000
2" diameter +.010 - .000
2-1/4" to 2-3/4" diameter +.015 - .000
3" to 5" diameter +.187 - .000
over 5" diameter sufficiently oversized to finish
|
|
|
| NOTE: All values are average test results from typical production material. No warranty is implied or guaranteed and testing is recommended for each application. |
ASTM Property Tested Test Units Acetal Acetal Glass filled Delrin®
Test (Homopolymer) (Copolymer) Acetal
Method
PHYSICAL
D638 Tensile Strength p.s.i. 10,000 9,000 12,000 7,600
D638 Elongation (Break) %@73°F. 75 60 -- 22
D1822 Tensile Impact ft.lbs./sq.in. 170 90 -- 50
D695 Compressive Strength p.s.i. (at yield) 18,000 16,000 16,500 13,000
D790 Flexural Strength p.s.i. 14,300 13,000 20,000 10,500
D256 Impact Strength ft.lbs./in@73°F 2.3 1.5 .8-1.0 1.2
(Notched IZOD)
D785 Hardness Rockwell R-M R120 M80 M79 R118
D621 Deformation Under %(122°F, 2000 0.5 -- 0.5 0.6
Load p.s.i. 24 hrs.)
THERMAL
D696 Thermal Conductivity B.T.U./hr./sq.ft./of 2.6 -- -- --
D648 Thermal Expansion in. 5.8 x 10 4.7 x 10 -- 5.8 x 10
D789 Heat Deflection in./in.°F 342 320 326 334
Melting Point °F@ 66 p.s.i. 277 230 292 244
°F@ 264 p.s.i. 347 329 331 347
ELECTRICAL
D149 Dielectric Strength Volts/mil 500 500 -- 400
D257 Volume Resistivity OHMS/cm. 10 -- 1.2x10 3x10
D150 Dielectric Constant
100 HZ 3.7 3.8 3.8 3.1
10 HZ 3.7 3.8 3.8 3.1
D150 Dissipation (Power Factor)
100 HZ -- 0.0010 0.0021 --
10 HZ -- 0.0010 0.0020 --
10 HZ Seconds 0.005 0.0005 0.0061 0.009
Arc Resistance 220 -- 200 183
Chemical
D543 Chemical Resistance
@ 73°F Weak Acids Resistant Resistant Resistant Resistant
to Some to Some to Some to Some
Strong Acids Attacked Attacked Attacked Attacked
Weak Alkalies Resistant Resistant Resistant Resistant
to Some to Some to Some to Some
Strong Alkalies Attacked Attacked Attacked Attacked
Miscellaneous
D792 Specific Gravity Grams/C.C. 1.42 1.41 1.58 1.54
D570 Water Absorption %(24 hrs.) 0.25 0.22 0.25 0.20
D635 Burning Rate Slow Slow Slow Slow
Return to the top of this page.